What Is Mastic Adhesive?

Mastic adhesive is made from the sticky resin of the mastic tree, which grows in the Mediterranean. Because of its sticky nature, it is used as a bonding agent in many commercial applications. Some types include construction adhesive, industrial adhesive, and ceramic tileadhesive. Depending on the application, the adhesive is available in thin liquid, thick glue, or paste form.

When used in construction, mastic adhesive is typically in liquid form and applied with a caulking gun. The adhesive is squeezed out by hand in a thin line along wall or ceiling joints. The strength of the adhesive helps hold load-bearing walls in place. In ceilings, the quick-setting adhesive eliminates the need to support heavy drywall for extended periods of time. Construction adhesive is also used as a temporary hold for fixtures so they can be nailed or screwed in place by one person.

Industrial uses for this adhesive include repairing duct work in the heating and air industry. This is due to its heat resistant properties and the ability to seal and form and a strong bond. The adhesive also bonds with most any material, so repairs to concrete, brick, or mortar are also possible. The adhesive for industrial uses comes in a finely ground powder that is mixed to form a paste. It is smeared onto the repair area and allowed to dry.

New method of growing high-quality graphene promising for next-gen technology

New method of growing high-quality graphene promising for next-gen technology (Nanowerk News) Making waves as the material that will revolutionize electronics, graphene – composed of a single layer of Carbon atoms – has nonetheless been challenging to produce in a way that will be practical for innovative electronics applications. Researchers at UC Santa Barbara have discovered a method to synthesize high quality graphene in a controlled manner that may pave the way for next-generation electronics application.

Kaustav Banerjee, a professor with the Electrical and Computer Engineering department and Director of the Nanoelectronics Research Lab at UCSB that has been studying carbon nanomaterials for more than seven years, led the research team to perfect methods of growing sheets of graphene, as detailed in a study to be published in the November 2011 issue of the journal Carbon.

UCSB researchers have successfully controlled the growth of a high-quality bilayer graphene on a copper substrate using a method called chemical vapor deposition (CVD), which breaks down molecules of methane gas to build graphene sheets with carbon atoms. (Image: Peter Allen) "Our process has certain unique advantages that give rise to high quality graphene," says Banerjee. "For the electronics industry to effectively use graphene, it must first be grown selectively and in larger sheets. We have developed a synthesis technique that yields high- quality and high-uniformity graphene that can be translated into a scalable process for industry applications."

Using adhesive tape to lift flakes of graphene from graphite, University of Manchester researchers Geim and Novoselov were awarded the 2010 Nobel Prize in Physics for their pioneering isolation and characterization of the material. To launch graphene into futuristic applications, however, researchers have been seeking a controlled and efficient way to grow a higher quality of this single-atom-thick material in larger areas.

The discovery by UCSB researchers turns graphene production into an industry-friendly process by improving the quality and uniformity of graphene using efficient and reproducible methods. They were able to control the number of graphene layers produced – from mono-layer to bi-layer graphene – an important distinction for future applications in electronics and other technology.

"Intel has a keen interest in graphene due to many possibilities it holds for the next generation of energy- efficient computing, but there are many roadblocks along the way," added Intel Fellow, Shekhar Borkar. "The scalable synthesis technique developed by Professor Banerjee's group at UCSB is an important step forward."

As a material, graphene is the thinnest and strongest in the world – more than 100 times stronger than diamond – and is capable of acting as an ultimate conductor at room temperature. If it can be produced effectively, graphene's properties make it ideal for advancements in green electronics, super strong materials, and medical technology. Graphene could be used to make flexible screens and electronic devices, computers with 1,000 GHz processors that run on virtually no energy, and ultra-efficient solar power cells. Key to the UCSB team's discovery is their understanding of graphene growth kinetics under the influence of the substrate. Their approach uses a method called low pressure chemical vapor deposition (LPCVD) and involves disintegrating the hydrocarbon gas methane at a specific high temperature to build uniform layers of carbon (as graphene) on a pretreated copper substrate. Banerjee's research group established a set of techniques that optimized the uniformity and quality of graphene, while controlling the number of graphene layers they grew on their substrate.

According to Dr. Wei Liu, a post-doctoral researcher and co-author of the study, "Graphene growth is strongly affected by imperfection sites on the copper substrate. By proper treatment of the copper surface and precise selection of the growth parameters, the quality and uniformity of graphene are significantly improved and the number of graphene layers can be controlled."

Professor Banerjee and credited authors Wei Liu, Hong Li, Chuan Xu and Yasin Khatami are not the first research team to make graphene using the CVD method, but they are the first to successfully refine critical methods to grow a high quality of graphene. In the past, a key challenge for the CVD method has been that it yields a lower quality of graphene in terms of carrier mobility – or how well it conducts electrons. "Our graphene exhibits the highest reported field-effect mobility to date for CVD graphene, having an average value of 4000 cm2/V.s with the highest peak value at 5500 cm2/V.s. This is an extremely high value compared with the mobility of silicon." added Hong Li, a Ph.D. candidate in Banerjee's research group.

"Kaustav Banerjee's group is leading graphene nanoelectronics research efforts at UCSB, from material synthesis to device design and circuit exploration. His work has provided our campus with unique and very powerful capabilities," added David Awschalom, Professor of Physics, Electrical and Computer Engineering, and Director of the California NanoSystems Institute (CNSI) at UCSB where Banerjee's laboratory is located. "This new facility has also boosted our opportunities for collaborations across various science and engineering disciplines."

"There is no doubt graphene is a superior material. Intrinsically it is amazing," says Banerjee. "It is up to us, the scientists and engineers, to show how we can use graphene and harness its capabilities. There are challenges in how to grow it, how to transfer or not to transfer and pattern it, and how to tailor its properties for specific applications. But these challenges are fertile grounds for exciting research in the future."

History Of Adhesive

History Of Adhesive

The oldest known adhesive, dated to approximately 200,000 BC, is from spear stone flakes glued to wood with birch-bark-tar, which was found in central Italy.[4] The use of compound glues to haft stone spears into wood dates back to approximately 70,000 BC. Evidence for this has been found in Sibudu Cave, South Africa and the compound glues used were made from plant gum and red ochre. The Tyrolean Iceman had weapons fixed together with the aid of birch-bark-tar glue.

6000-year-old ceramics show evidence of adhesives based upon animal glues made by rendering animal products such as horse teeth. During the times of Babylonia, tar-like glue was used for gluing statues. The Egyptians made much use of animal glues to adhere furniture, ivory, and papyrus. The Mongols also used adhesives to make their short bows, and the Native Americans of the eastern United States used a mixture of spruce gum and fat as adhesives to fashion waterproof seams in their birchbark canoes.

In medieval Europe, egg whites were used as glue to decorate parchments with gold leaf. The first actual glue factory was founded in Holland in the early 18th century. In the 1750s, the English introduced fish glue. As the modern world evolved, several other patented[clarification needed] materials, such as bones, starch, fish skins and isinglass, and casein, were introduced as alternative materials for glue manufacture. Modern glues have improved flexibility, toughness, curing rate, and chemical resistance.

In the late 19th century in Switzerland, casein was first used as a wood glue. Today, it is used to glue grocery bags.

History Of Adhesive

History Of Adhesive

The oldest known adhesive, dated to approximately 200,000 BC, is from spear stone flakes glued to wood with birch-bark-tar, which was found in central Italy.[4] The use of compound glues to haft stone spears into wood dates back to approximately 70,000 BC. Evidence for this has been found in Sibudu Cave, South Africa and the compound glues used were made from plant gum and red ochre. The Tyrolean Iceman had weapons fixed together with the aid of birch-bark-tar glue.

6000-year-old ceramics show evidence of adhesives based upon animal glues made by rendering animal products such as horse teeth. During the times of Babylonia, tar-like glue was used for gluing statues. The Egyptians made much use of animal glues to adhere furniture, ivory, and papyrus. The Mongols also used adhesives to make their short bows, and the Native Americans of the eastern United States used a mixture of spruce gum and fat as adhesives to fashion waterproof seams in their birchbark canoes.

In medieval Europe, egg whites were used as glue to decorate parchments with gold leaf. The first actual glue factory was founded in Holland in the early 18th century. In the 1750s, the English introduced fish glue. As the modern world evolved, several other patented[clarification needed] materials, such as bones, starch, fish skins and isinglass, and casein, were introduced as alternative materials for glue manufacture. Modern glues have improved flexibility, toughness, curing rate, and chemical resistance.

In the late 19th century in Switzerland, casein was first used as a wood glue. Today, it is used to glue grocery bags.

Adhesive

An adhesive, also known as glue, is a material, typically liquid or semi-liquid, that adheres or bonds items together. Adhesives come from either natural or synthetic sources. The types of materials that can be bonded are vast but adhesives are especially useful for bonding thin materials. Adhesives cure (harden) by either evaporating a solvent or by chemical reactions that occur between two or more constituents.
Adhesives are useful for joining thin or dissimilar materials, minimizing weight, and providing a vibration-damping joint. A disadvantage of most adhesives is that most do not form an instantaneous joint, unlike many other joining processes, because the adhesive needs time to cure.
The earliest known date for a simple glue is 200,000 BC and for a compound glue 70,000 BC.

Adhesive

An adhesive, also known as glue, is a material, typically liquid or semi-liquid, that adheres or bonds items together. Adhesives come from either natural or synthetic sources. The types of materials that can be bonded are vast but adhesives are especially useful for bonding thin materials. Adhesives cure (harden) by either evaporating a solvent or by chemical reactions that occur between two or more constituents.
Adhesives are useful for joining thin or dissimilar materials, minimizing weight, and providing a vibration-damping joint. A disadvantage of most adhesives is that most do not form an instantaneous joint, unlike many other joining processes, because the adhesive needs time to cure.
The earliest known date for a simple glue is 200,000 BC and for a compound glue 70,000 BC.

Mesh

Mesh
       Mesh consists of semi-permeable barrier made of connected strands of metal, fiber, or other flexible/ductile material. Mesh is similar to web or net in that it has many attached or woven strands Types of mesh A plastic mesh is extruded, oriented, expanded or tubular. Plastic mesh can be made from polypropylene, polyethylene, nylon, PVC or PTFE. A metal mesh can be woven, knitted, welded, expanded, photo-chemically etched or electroformed (screen filter) from steel or other metals.In clothing, a mesh is often defined as a loosely woven or knitted fabric that has a large number of closely spaced holes, frequently used for modern sports jerseys and other clothing. A mesh skin graft is a skin patch that has been cut systematically to create a mesh. Meshing of skin grafts provides coverage of a greater surface area at the recipient site, and also allows for the egress of serous or sanguinous fluid. However, it results in a rather pebbled appearance upon healing that may ultimately look less aesthetically pleasing. Uses of meshes Meshes are often used to screen out unwanted things, such as insects. Wire screens on windows and mosquito netting can be considered as types of meshes. Wire screens can be used to shield against radio frequency radiation, e.g. in microwave ovens and Faraday cages. Metal and nylon wire mesh filters are used in filtration Wire mesh is used in guarding for secure areas and as protection in the form of vandal screens. Wire mesh can be fabricated to produce park benches, waste baskets and other baskets for material handling. A huge quantity of mesh is being used for screen printing work. Surgical mesh is used to provide a reinforcing structure in surgical procedures like inguinal hernioplasty, and umbilical hernia repair. Meshes are also used as drum heads in practice and electronic drum sets.

High temperature insulation

High temperature insulation Calcium silicate
    Calcium silicate (often referred to by its shortened trade name Cal-Sil or Calsil) is the chemical compound Ca2SiO4, also known as calcium orthosilicate and sometimes formulated 2CaO.SiO2. It is one of group of compounds obtained by reacting calcium oxide and silica in various ratios[3] e.g. 3CaO•SiO2, Ca3SiO5; 2CaO•SiO2, Ca2SiO4; 3CaO•2SiO2, Ca3Si2O7 and CaO•SiO2, CaSiO3. Calcium orthosilicate is a white powder with a low bulk density and high physical water absorption. It is used as an anti-caking agent and an antacid. A white free-flowing powder derived from limestone and diatomaceous earth, calcium silicate has no known adverse effects to health[citation needed]. It is used in roads, insulation, bricks, roof tiles, table salt[4] and occurs in cements, where it is known as belite (or in cement chemist notation C2S).


High temperature insulation
   Calcium silicate is commonly used as a safe alternative to asbestos for high temperature insulation materials. Industrial grade piping and equipment insulation is often fabricated from calcium silicate. Its fabrication is a routine part of the curriculum for insulation apprentices. Calcium silicate competes in these realms against rockwool as well as proprietary insulation solids, such as perlite mixture and vermiculite bonded with sodium silicate. Although it is popularly considered an asbestos substitute, early uses of calcium silicate for insulation still made use of asbestos fibers.

Natural adhesives

Natural adhesives
      Natural adhesives are made from organic sources such as vegetable matter, starch (dextrin), natural resins or from animals e.g. casein or animal glue. They are often referred to as bioadhesives. One example is a simple paste made by cooking flour in water. Animal glues are traditionally used in bookbinding, wood joining, and many other areas but now are largely replaced by synthetic glues. Casein is mainly used to adhere glass bottle labels. Starch based adhesives are used in corrugated board production and paper sack production, paper tube winding, and wall paper adhesives. Masonite, a wood hardboard, was bonded using natural lignin, (although most modern MDF particle boards use synthetic thermosetting resins). Another form of natural adhesive is blood albumen (made from protein component of blood), which is used in the plywood industry. Animal glue remains the preferred glue of the luthier. Casein based glues are made by precipitating casein from milk protein using the acetic acid from vinegar. This forms curds, which are neutralized with a base, such as sodium bicarbonate (baking soda), to cause them to unclump and become a thicker plastic-like substance

Synthetic adhesives

Synthetic adhesives
     Synthetic adhesives are based on elastomers, thermoplastics, emulsions, and thermosets. Examples of thermosetting adhesives are: epoxy, polyurethane, cyanoacrylate and acrylic polymers. See also post-it notes. The first commercially produced synthetic adhesive was Karlsons klister in the 1920s.

Aluminium

Aluminium ( /ˌæljuːˈmɪniəm/ al-ew-min-ee-əm) or aluminum (American English;  /əˈluːmɪnəm/ ə-loo-mi-nəm) is a chemical element in the boron group with symbol Al and atomic number 13. It is silvery white, and it is not soluble in water under normal circumstances.
Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal, in the Earth's crust. It makes up about 8% by weight of the Earth's solid surface. Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals.[6] The chief ore of aluminium is bauxite.
Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. The most useful compounds of aluminium, at least on a weight basis, are the oxides and sulfates.
Despite its prevalence in the environment, aluminium salts are not known to be used by any form of life. In keeping with its pervasiveness, aluminium is well tolerated by plants and animals.[7] Owing to their prevalence, potential beneficial (or otherwise) biological roles of aluminium

High temperature insulation wool

          In the 1950s, the term “Refractory Ceramic Fibre” was coined for the aluminium silicate fibres developed at this time. On account of their chemical purity and resistance to high temperatures (classification temperature >1000 °C) as well as on the basis of their use in other applications, this definition was made to differentiate aluminium silicate wools from the conventional “mineral wools”. Because of the ambiguity of the term “ceramic” and the development of new materials for the high temperature range, the nomenclature was changed to High Temperature Insulation Wool (HTIW) at the end of the 1990s.

          Basically, there are two types of inorganic HTIW. In addition to the more commonly used amorphous HTIW (Alumino Silicate Wool ASW/RCF and Alkaline Earth Silicate Wool (AES)), Polycrystalline Wool (PCW) is also available. Owing to the costly production and limited availability compared to mineral wool, HTIW products are almost only used in industrial applications and processes up to 1800 °C.

Thank for Info : http://en.wikipedia.org

Silicon nitride

          Silicon nitride is a chemical compound of silicon and nitrogen. If powdered silicon is heated between 1300 °C and 1400 °C in an atmosphere of nitrogen, trisilicon tetranitride, Si₃N₄ is formed. The silicon sample weight increases progressively due to the chemical combination of silicon and nitrogen. Without an iron catalyst, the reaction is complete after several hours (~7), when no further weight increase due to nitrogen absorption (per gram of silicon) is detected. In addition to Si₃N₄, several other silicon nitride phases (with chemical formulas corresponding to varying degrees of nitridation/Si oxidation state) have been reported in the literature, for example, the gaseous disilicon mononitride (Si₂N); silicon mononitride (SiN), and silicon sesquinitride (Si₂N₃), each of which are stoichiometric phases. As with other refractories, the products obtained in these high-temperature syntheses depends on the reaction conditions (e.g. time, temperature, and starting materials including the reactants and container materials), as well as the mode of purification. However, the existence of the sesquinitride has since come into question.

The Si₃N₄ phase is the most chemically inert (being decomposed by dilute HF and hot H₂SO₄). It is also the most thermodynamically stable of the silicon nitrides. Hence, Si₃N₄ is the most commercially important of the silicon nitrides and is generally understood as what is being referred to where the term "silicon nitride" is used.

          Silicon nitride (i.e. Si₃N₄) is a hard ceramic having high strength over a broad temperature range, moderate thermal conductivity, low coefficient of thermal expansion, moderately high elastic modulus, and unusually high fracture toughness for a ceramic. This combination of properties leads to excellent thermal shock resistance, ability to withstand high structural loads to high temperature, and superior wear resistance. Silicon nitride is mostly used in high-endurance and high-temperature applications, such as gas turbines, car engine parts, bearings and metal working and cutting tools. Silicon nitride bearings are used in the main engines of the NASA's Space shuttles. Thin silicon nitride films are a popular insulating layer in silicon-based electronics and silicon nitride cantilevers are the sensing parts of atomic force microscopes.

Thank for Info : http://en.wikipedia.org

Refractory metals

          Refractory metals are a class of metals that are extraordinarily resistant to heat and wear. The expression is mostly used in the context of materials science, metallurgy and engineering. The definition of which elements belong to this group differs. The most common definition includes five elements: two of the fifth period (niobium andmolybdenum) and three of the sixth period (tantalum, tungsten, and rhenium). They all share some properties, including a melting point above 2000 °C and high hardness at room temperature. They are chemically inert and have a relatively high density. Their high melting points make powder metallurgy the method of choice for fabricatingcomponents from these metals. Some of their applications include tools to work metals at high temperatures, wire filaments, casting molds, and chemical reaction vessels in corrosive environments. Partly due to the high melting point, refractory metals are stable against creep deformation to very high temperatures.


Thank for Info : http://en.wikipedia.org

Oil shale

Oil shale

          Oil shale, also known as kerogen shale, is an organic-rich fine-grained sedimentary rock containing kerogen (a solid mixture of organic chemical compounds) from which liquid hydrocarbons called shale oil (not to be confused with tight oil—crude oil occurring naturally in shales) can be produced. Shale oil is a substitute for conventional crude oil; however, extracting shale oil from oil shale is more costly than the production of conventional crude oil both financially and in terms of its environmental impact. Deposits of oil shale occur around the world, including major deposits in the United States of America. Estimates of global deposits range from 2.8 to 3.3 trillion barrels (450×10⁹ to 520×10⁹ m³) of recoverable oil.

          Heating oil shale to a sufficiently high temperature causes the chemical process of pyrolysis to yield a vapor. Upon cooling the vapor, the liquid shale oil—an unconventional oil—is separated from combustible oil-shale gas (the term shale gas can also refer to gas occurring naturally in shales). Oil shale can also be burnt directly in furnaces as a low-grade fuel for power generation and district heating or used as a raw material in chemical and construction-materials processing.

          Oil shale gains attention as a potential abundant source of oil whenever the price of crude oil rises. At the same time, oil-shale mining and processing raise a number of environmental concerns, such as land use, waste disposal, water use, waste-water management, greenhouse-gas emissions and air pollution. Estonia and China have well-established oil shale industries, and Brazil, Germany, Russia also utilize oil shale.

          Oil shales differ from oil-bearing shales, shale deposits which contain petroleum (tight oil) that is sometimes produced from drilled wells. Examples of oil-bearing shales are the Bakken Formation, Pierre Shale, Niobrara Formation, and Eagle Ford Formation.

Thank for Info : http://en.wikipedia.org

Thermal insulation

Thermal insulation

          Thermal insulation is the reduction of heat transfer between objects in thermal contact or in range of radiative influence. Heat transfer is the transfer of thermal energy between objects of differing temperature. The means to stem heat flow may be especially engineered methods or processes, as well as suitable static objects and materials.

Heat flow is an inevitable consequence of contact between objects of differing temperature. Thermal insulation provides a means to maintain a gradient of temperature, by providing a region of insulation in which heat flow is reduced or thermal radiation is reflected rather than absorbed.

          In building construction, insulating materials are assigned a quantitative measure of the insulating capability, called the R-value.

         In thermal engineering of insulating systems for ovens, reactors, and furnaces, thermal conductivity (K), product density and specific heat (C) are the key product characteristics, which influence insulating efficiency, such as acolodet insulating.

Low thermal conductivity (K) is analogous to high insulating capability (R).

          Aerogels, microporous silica and ceramic fiber insulation are three best performing insulators for applications between 200 Celsius and 2000 Celsius. Zirconia fibers have the lowest thermal conductivity of all ceramic fiber products and are used in applications up to 2000 Celsius.

Thank for Info : http://en.wikipedia.org

Filtration

Filtration

         Filtration is commonly the mechanical or physical operation which is used for the separation of solids from fluids (liquids or gases) by interposing a medium through which only the fluid can pass. Oversize solids in the fluid are retained, but the separation is not complete; solids will be contaminated with some fluid and filtrate will contain fine particles (depending on the pore size and filter thickness). Filtration is also used to describe some biological processes, especially in water treatment and sewage treatment in which undesirable constituents are removed by absorption into a biological film grown on or in the filter medium.


Thank for Info : http://en.wikipedia.org

Furnace

          A furnace is a device used for heating. The name derives from Latin fornax, oven.

In American English and Canadian English, the term furnace on its own is generally used to describe household heating systems based on a central furnace (known either as a boiler or a heater in British English), and sometimes as a synonym for kiln, a device used in the production of ceramics. InBritish English the term furnace is used exclusively to mean industrial furnaces which are used for many things, such as the extraction of metal from ore(smelting) or in oil refineries and other chemical plants, for example as the heat source for fractional distillation columns.

          The term furnace can also refer to a direct fired heater, used in boiler applications in chemical industries or for providing heat to chemical reactions for processes like cracking, and is part of the standard English names for many metallurgical furnaces worldwide.

The heat energy to fuel a furnace may be supplied directly by fuel combustion, by electricity such as the electric arc furnace, or through induction heatingin induction furnaces.

Thank for Info : http://en.wikipedia.org

Plastic explosive

          Plastic explosive is a specialised form of explosive material. It is a soft and hand moldable solid material. Plastic explosives are properly known as putty explosives within the field of explosives engineering. Common plastic explosives include Semtex and C-4. Plastic explosives are especially suited for explosive demolition as they can be easily formed into the best shapes for cutting structural members and have a high enough velocity of detonation and density for metal cutting work. They are generally not used for ordinary blasting as they tend to be significantly more expensive than other materials that perform just as well in that field. Also, when an explosive is combined with a plasticizer, its power is generally lower than when it is pure.


Thank for Info : http://en.wikipedia.org

Putty

          Putty is a generic term for a plastic material similar in texture to clay or dough typically used in domestic construction and repair as a sealant or filler.Painter's Putty is typically a linseed oil based product used for filling holes, minor cracks and defacements in wood only. Putties can also be madeintumescent, in which case they are used for firestopping as well as for padding of electrical outlet boxes in fire-resistance rated drywall assemblies. In the latter case, hydrates in the putty produce an endothermic reaction to mitigate heat transfer to the unexposed side.


Thank for Info : http://en.wikipedia.org